The Yamato REV-202M-A is the 115 V rotary-evaporator main unit of Yamato's current RE202/212 · REV202M/212M digital platform — the motorized drive head with digital speed readout and manual-balance hand-lift jack, supplied without glass set or heating bath so you configure those to the application. A DC brushless (simple servo) motor turns the flask across 5–315 rpm with forward/reverse/auto-inversion on an encoder dial with digital display. This is the REV variant, factory-fitted with the VR102S color-LCD vacuum controller (0–1013 hPa).
Key Specifications
| Model / SKU | Yamato REV-202M-A |
| Configuration | Main unit only — with VR102S vacuum controller, 115 V; glass set (A/B/C) and 5 L water/oil bath ordered separately |
| Scope of supply | Main unit only — glass set and heating bath sold separately |
| Rotation speed | 5–315 rpm (encoder dial: ±1 slow / ±10 fast) |
| RPM display | Digital display / control knob |
| Rotation mode | Forward / reverse / auto inversion |
| Rotary motor | DC brushless (simple servo) |
| Evaporation capacity | Up to 23 mL/min |
| Evaporation flask | 50–2000 mL (optional reducer for smaller flasks) |
| Receiving flask | 100–2000 mL |
| Cooling condenser | Double corrugated tube, 0.143 m² cooling surface |
| Lift / jack | Manual balance jack — stepless, max height 200 mm, one-touch lock |
| Vacuum controller | VR102S — color LCD (2.3"), setting 0–1013 hPa (measurement 0–1100 hPa); modes Manual / Gradient / Auto; hold function; units mmHg/Torr/hPa/kPa/mbar; auto-leak + auto-clean at end; requires OVR10 solenoid valve; ~0.5 kg |
| Pressure setting range | 0–1013 hPa |
| Safety device | DC motor: overload, overvoltage, low-voltage, rotation-speed-sensor error; AC adapter: internal short-circuit, overcurrent, overvoltage protection; VR102S controller: communication, pressure-sensor, memory, leak, high-pressure errors, auto-leak on error occurrence |
| Operating ambient temp. | 5–35 °C |
| Weight | ~10.5 kg |
| Power | 100–115 V, 1 A, 50/60 Hz (with plug) |
| Included accessories | Main unit: AC adapter (1), power cable (1), bath guide (1), rear cover (1), single-sided tape fastener roll (1), double-sided tape fastener roll (1) |
Configuration & Ordering
Glass sets: Set A (diagonal condenser), Set B (vertical condenser, space-saving), Set C (cold finger, for volatile / low-boiling-point solvents). Baths: 5 L water (RT +10–90 °C) or oil (RT +10–180 °C). Available in 115 V (RE202/REV202M) and 220 V (RE212/REV212M); RE = basic, REV = with VR102S vacuum controller.
