The Yamato RE-202-AWA is a complete 115 V rotary-evaporator system from Yamato's RE202/212 · REV202M/212M digital platform, configured with Set A glassware and a Water bath BM-302-A (5 L). A DC brushless (simple servo) motor turns the flask across 5–315 rpm (encoder dial, digital display) with forward/reverse/auto inversion; the double-corrugated-tube condenser (0.143 m²) handles up to 23 mL/min. An external aspirator or vacuum pump provides vacuum; the VR102S controller is optional.
Key Specifications
| Model / SKU | Yamato RE-202-AWA |
| Configuration | Set A · Water bath BM-302-A · 115 V |
| Glass set | Set A — traditional glass set, condenser tilted diagonally (use with chiller) (glassware code RG202A) |
| Heating bath | Water bath BM-302-A, 5 L, RT +10 to +90 °C (±1.0 °C) |
| Bath details | Internal Φ240 × H119 mm; external Φ262 × H240 mm; ~4.5 kg; safety: automatic + independent overheat prevention, temp-upper-limit error, overcurrent fuse; 2A service outlet (AC100–115 V) |
| Rotation speed | 5–315 rpm (encoder dial: ±1 slow / ±10 fast) |
| RPM display | Digital display / control knob |
| Rotation mode | Forward / reverse / auto inversion |
| Rotary motor | DC brushless (simple servo) |
| Evaporation capacity | Up to 23 mL/min |
| Evaporation flask | 50–2000 mL (optional reducer for smaller flasks) |
| Receiving flask | 100–2000 mL |
| Cooling condenser | Double corrugated tube, 0.143 m² cooling surface |
| Condenser retention | None |
| Condenser connections | Suction port GL-14 (lower), Φ10 nozzle; cooling port GL-14 (two, lower), two Φ10 nozzles |
| Lift / jack | Manual balance jack — stepless, max height 200 mm, one-touch lock |
| Vacuum | External aspirator / vacuum pump required; VR102S vacuum controller optional |
| Safety device | DC motor: overload, overvoltage, low-voltage, rotation-speed-sensor error; AC adapter: internal short-circuit, overcurrent, overvoltage protection |
| Operating ambient temp. | 5–35 °C |
| Overall dimensions (W×D×H) | 744 × 365 × 534 mm (overall, incl. bath) |
| Weight | ~10.0 kg |
| Power | 100–115 V, 1 A, 50/60 Hz (with plug) |
| Included accessories | Main unit: AC adapter (1), power cable (1), bath guide (1), rear cover (1), single-sided tape fastener roll (1), double-sided tape fastener roll (1). Glass set: cooling condenser (type A/B/C) (1), rotary joint (1), evaporation flask (1), receiving flask (1), ball joint clamp (1), flask clip (1), vacuum seal (1), condenser insulation kit (1); Set B/C add condenser bracket (1) + hex wrench (1) |
Configuration & Ordering
Glass sets: Set A (diagonal condenser), Set B (vertical condenser, space-saving), Set C (cold finger, for volatile / low-boiling-point solvents). Baths: 5 L water (RT +10–90 °C) or oil (RT +10–180 °C). Available in 115 V (RE202/REV202M) and 220 V (RE212/REV212M); RE = basic, REV = with VR102S vacuum controller.
