| Model / SKU | Yamato REV-212M-BO2A |
| Configuration | Set B · Oil bath BO-312-A · 220 V · VR102S vacuum controller |
| Glass set | Set B — standard glass set, condenser set vertically, suitable for limited space (use with chiller) (glassware code RG202B) |
| Heating bath | Oil bath BO-312-A, 5 L, RT +10 to +180 °C (±2 °C) |
| Bath details | Internal Φ240 × H119 mm; external Φ262 × H240 mm; ~4.5 kg; safety: automatic + independent overheat prevention, temp-upper-limit error, overcurrent fuse |
| Rotation speed | 5–315 rpm (encoder dial: ±1 slow / ±10 fast) |
| RPM display | Digital display / control knob |
| Rotation mode | Forward / reverse / auto inversion |
| Rotary motor | DC brushless (simple servo) |
| Evaporation capacity | Up to 23 mL/min |
| Evaporation flask | 50–2000 mL (optional reducer for smaller flasks) |
| Receiving flask | 100–2000 mL |
| Cooling condenser | Double corrugated tube, 0.143 m² cooling surface |
| Condenser retention | Condenser bracket (included) |
| Condenser connections | Suction port GL-14 (upper), Φ10 nozzle; cooling port GL-14 (two, lower), two Φ10 nozzles |
| Lift / jack | Manual balance jack — stepless, max height 200 mm, one-touch lock |
| Vacuum controller | VR102S — color LCD (2.3"), setting 0–1013 hPa (measurement 0–1100 hPa); modes Manual / Gradient / Auto; hold function; units mmHg/Torr/hPa/kPa/mbar; auto-leak + auto-clean at end; requires OVR10 solenoid valve; ~0.5 kg |
| Pressure setting range | 0–1013 hPa |
| Safety device | DC motor: overload, overvoltage, low-voltage, rotation-speed-sensor error; AC adapter: internal short-circuit, overcurrent, overvoltage protection; VR102S controller: communication, pressure-sensor, memory, leak, high-pressure errors, auto-leak on error occurrence |
| Operating ambient temp. | 5–35 °C |
| Overall dimensions (W×D×H) | 554 × 365 × 745 mm (overall, incl. bath) |
| Weight | ~10.5 kg |
| Power | 200–230 V single phase, 1 A, 50/60 Hz (no plug, round terminal) |
| Included accessories | Main unit: AC adapter (1), power cable (1), bath guide (1), rear cover (1), single-sided tape fastener roll (1), double-sided tape fastener roll (1). Glass set: cooling condenser (type A/B/C) (1), rotary joint (1), evaporation flask (1), receiving flask (1), ball joint clamp (1), flask clip (1), vacuum seal (1), condenser insulation kit (1); Set B/C add condenser bracket (1) + hex wrench (1) |
