The Yamato AWD-510DRY is the pre-drying version of Yamato's process-monitorable laboratory glassware washer, adding a 700 W HEPA-filtered hot-air drying stage after a full pre-wash → wash → rinse → final-wash cycle with disinfection water up to 93 °C. Like the base AWD-510, it signals each stage through color-coded LED and internal tank lighting and a 4.3-inch touch panel, so cleaning is safer, more consistent, and monitorable from a distance. It runs on single-phase AC220V.
Key Specifications
| SKU | AWD-510DRY |
| Type | Upper/middle/lower-stage pressurized rotary jet-nozzle washer with pre-drying |
| Objects washed | Glassware including test tubes, flasks, beakers (excluding pipettes) |
| Program | Pre-wash → wash → rinse → final wash → pre-drying |
| Wash water temperature | Pre-wash & wash 45–80 °C; rinse & final wash 45–93 °C |
| Washing time | 1–60 min (~10 min for ≥90 °C); repeat count 1–10 |
| Pre-drying | Heater 700 W; hot-air drying with external air via HEPA; fixed ~60 °C; time 1–360 min |
| Stored programs | 9 patterns |
| Process display | Panel LED per stage; internal lighting — pre-wash (green), wash (yellow), rinse (blue), final wash (light blue), pre-drying (purple) |
| Operation panel | 4.3-inch LCD touch panel; calendar/battery backup, set-memory |
| Detergent | Liquid (automatic supply unit) or powder (manual during operation) |
| Max. washing volume | 2-stage: upper 10 kg (eff. height 150 mm) + lower 15 kg (165 mm); 1-stage: lower 15 kg (300 mm) |
| Inner tank | W500 × D480 × H480 mm, SUS316; internal filter 10 mesh, tank filter 40 mesh; 2 kW wash heater; Pt100 bath sensor |
| Water supply | Tap water G3/4 (G1/2 equipment side), ≥10 L/min, 5–25 °C, 0.1–0.5 MPa |
| Draining | ≤60 °C, φ31.5 mm port, forced drain with pump |
| Door | Front-loading (damper); heat-resistant double glass window |
| External dimensions | W580 × D600 × H845 mm |
| Weight | Dry weight 87 kg (excl. racks and circulation water) |
| Safety devices | Interlock, door lock, overtemperature prevention, water-full detection, circulation-pressure-drop detection, leakage detection |
| Power supply | Single phase AC220V, 13 A (breaker 15 A); 3 m cord |
Application Profile
The AWD-510DRY suits labs that want wash-through-dry in a single cabinet — glassware comes out clean, disinfected, and dry without a transfer step to a separate drying oven. After the monitored pre-wash → wash → rinse → final-wash sequence (rinse to 93 °C for thermal disinfection), the pre-drying stage draws external air through a HEPA filter and warms it to about 60 °C, drying interiors for a settable 1–360 minutes so no lint or airborne particles recontaminate the load.
Everything that makes the base washer process-monitorable carries over: five-color internal lighting (now including purple for pre-drying), a front LED, calendar and set-memory functions for recordkeeping, and a sliding two-tier rack for up to 10 kg upper plus 15 kg lower. Rotary jet nozzles spray from top, middle, and bottom; hot effluent is cooled below 60 °C before discharge so standard drain piping is fine; and an optional jet rack reaches inside flasks. Water and drain must meet the stated tap-water and ≤60 °C drain conditions.
Frequently Asked Questions
What does the pre-drying stage do? After the final wash, a 700 W heater warms external air pulled through a HEPA filter to about 60 °C and dries the load for a settable 1–360 minutes, preventing recontamination from room air.
What wash and disinfection temperatures does it reach? Pre-wash and wash run 45–80 °C; rinse and final wash run 45–93 °C for thermal disinfection.
How do I monitor the cycle? Via the 4.3-inch touch panel and color-coded lighting — pre-wash (green), wash (yellow), rinse (blue), final wash (light blue), and pre-drying (purple).
How much glassware fits per load? With two stages, 10 kg upper + 15 kg lower; single stage, 15 kg lower (300 mm effective height).
What utilities does it need? Tap water via G3/4 at ≥10 L/min, 5–25 °C, 0.1–0.5 MPa, and a drain (effluent cooled to ≤60 °C, forced-pump).
How does it differ from the AWD-510? Only the pre-drying stage — the AWD-510 washes and rinses but does not dry; the AWD-510DRY adds integrated HEPA hot-air drying.
Ordering & Configuration
Confirm at quote: racks for your glassware mix (jet rack, test-tube rack, beaker rack), detergent supply, and water/drain readiness.
Warranty: Per Yamato standard capital-equipment terms — confirm coverage at quote.
Add to a quote to lock racks, accessories, and lead time; the AWD-510DRY ships with water-supply and drain hoses, a detergent bottle rack and tube, upper/lower rotation nozzles, and the manual.
Yamato AWD series:
- AWD-510DRY (this product) — process-monitorable washer with 700 W HEPA hot-air pre-drying, 220V
- AWD-510 — same wash platform, without the drying stage
Choose the AWD-510DRY when you need clean-and-dry in one cabinet; choose the AWD-510 when a separate dryer or air-dry step already exists.
