The Yamato AWD-510 is a process-monitorable laboratory glassware washer that runs a programmable pre-wash → wash → rinse → final-wash sequence with rinse and disinfection water up to 93 °C, delivering safer, more consistent cleaning than hand washing. Its signature feature is at-a-glance monitoring: color-coded LED and internal tank lighting signal the current stage from across the room, backed by a 4.3-inch touch panel and nine stored programs. It runs on single-phase AC220V.
Key Specifications
| SKU | AWD-510 |
| Type | Upper/middle/lower-stage pressurized rotary jet-nozzle washer |
| Objects washed | Glassware including test tubes, flasks, beakers (excluding pipettes) |
| Program | Pre-wash → wash → rinse → final wash |
| Wash water temperature | Pre-wash & wash 45–80 °C; rinse & final wash 45–93 °C |
| Washing time | 1–60 min (~10 min for ≥90 °C); repeat count 1–10 |
| Stored programs | 9 patterns |
| Process display | Panel LED per stage; internal lighting: pre-wash (green), wash (yellow), rinse (blue), final wash (light blue) |
| Operation panel | 4.3-inch LCD touch panel; calendar/battery backup, set-memory |
| Detergent | Liquid (automatic supply unit) or powder (manual during operation) |
| Max. washing volume | 2-stage: upper 10 kg (eff. height 150 mm) + lower 15 kg (165 mm); 1-stage: lower 15 kg (300 mm) |
| Inner tank | W500 × D480 × H480 mm, SUS316; internal filter 10 mesh, tank filter 40 mesh; 2 kW heater; Pt100 bath sensor |
| Water supply | Tap water G3/4 (G1/2 equipment side), ≥10 L/min, 5–25 °C, 0.1–0.5 MPa |
| Draining | ≤60 °C, φ31.5 mm port, forced drain with pump |
| Door | Front-loading (damper); heat-resistant double glass window |
| External dimensions | W580 × D600 × H845 mm |
| Weight | Dry weight 87 kg (excl. racks and circulation water) |
| Safety devices | Interlock, door lock, overtemperature prevention, water-full detection, circulation-pressure-drop detection, leakage detection |
| Power supply | Single phase AC220V, 13 A (breaker 15 A); 3 m cord |
Application Profile
For labs that must document and defend cleaning outcomes, the AWD-510 turns washing into a monitored, repeatable process. Its rotary jet nozzles spray from top, middle, and bottom for even coverage, while rinse temperatures up to 93 °C provide thermal disinfection; hot effluent is cooled below 60 °C before discharge, so no heat-resistant drain piping is required, and a double-glazed window keeps the exterior cool during hot cycles.
The process-monitorable design is the differentiator versus a basic washer: five-color internal lighting and a front LED let staff confirm progress at a glance, the calendar and set-memory functions support recordkeeping, and a sliding two-tier rack cleans large batches at once, up to 10 kg upper plus 15 kg lower. An optional jet rack reaches inside flasks and other narrow containers, and detergent is metered automatically. Water and drain must meet the stated tap-water and ≤60 °C drain conditions.
Frequently Asked Questions
What wash and disinfection temperatures does it reach? Pre-wash and wash run 45–80 °C; rinse and final wash run 45–93 °C, providing thermal disinfection at the top of the range.
How do I monitor the cycle? The 4.3-inch touch panel plus color-coded LED and internal tank lighting show the active stage (pre-wash (green), wash (yellow), rinse (blue), final wash (light blue)) visible from a distance.
How much glassware fits per load? With two stages, 10 kg upper + 15 kg lower; with a single stage, 15 kg lower (300 mm effective height).
Do I need special drain plumbing? No. Effluent is cooled to ≤60 °C before discharge, eliminating the need for heat-resistant piping; the drain uses a forced pump.
What water supply does it require? Tap water via a G3/4 connection at ≥10 L/min, 5–25 °C, and 0.1–0.5 MPa.
How does it differ from the AWD-510DRY? The AWD-510 has no drying stage. The AWD-510DRY adds a 700 W HEPA-filtered hot-air pre-drying stage after the final wash.
Ordering & Configuration
Confirm at quote: racks for your glassware mix (jet rack, test-tube rack, beaker rack), detergent supply, and water/drain readiness.
Warranty: Per Yamato standard capital-equipment terms. Confirm coverage at quote.
Add to a quote to lock racks, accessories, and lead time; the AWD-510 ships with water-supply and drain hoses, a detergent bottle rack and tube, upper/lower rotation nozzles, and the manual.
Yamato AWD series:
- AWD-510 (this product): process-monitorable washer, wash → final wash, 220V
- AWD-510DRY. It adds a 700 W HEPA hot-air pre-drying stage
Choose the AWD-510 when a downstream dryer or air-dry step already exists; choose the AWD-510DRY for integrated pre-drying in one cabinet.
