Legacy Lab SuppliesPO
🔍

Yamato RE-202-AWA — Rotary Evaporator with Glass Set A & Water Bath (5 L), 115V vs Yamato RE-202-BWA — Rotary Evaporator with Glass Set B & Water Bath (5 L), 115V

Yamato RE-202-AWA — Rotary Evaporator with Glass Set A & Water Bath (5 L), 115V

Yamato RE-202-AWA — Rotary Evaporator with Glass Set A & Water Bath (5 L), 115V

$2,795.00

View →
Yamato RE-202-BWA — Rotary Evaporator with Glass Set B & Water Bath (5 L), 115V

Yamato RE-202-BWA — Rotary Evaporator with Glass Set B & Water Bath (5 L), 115V

$2,950.00

View →

Specifications side by side

SpecYamato RE-202-AWA —Yamato RE-202-BWA —
Power100–115 V, 1 A, 50/60 Hz (with plug)100–115 V, 1 A, 50/60 Hz (with plug)
VacuumExternal aspirator / vacuum pump required; VR102S vacuum controller optionalExternal aspirator / vacuum pump required; VR102S vacuum controller optional
Weight~10.0 kg~10.0 kg
Glass setSet A — traditional glass set, condenser tilted diagonally (use with chiller) (glassware code RG202A)Set B — standard glass set, condenser set vertically, suitable for limited space (use with chiller) (glassware code RG202B)
Lift / jackManual balance jack — stepless, max height 200 mm, one-touch lockManual balance jack — stepless, max height 200 mm, one-touch lock
Model / SKUYamato RE-202-AWAYamato RE-202-BWA
RPM displayDigital display / control knobDigital display / control knob
Bath detailsInternal Φ240 × H119 mm; external Φ262 × H240 mm; ~4.5 kg; safety: automatic + independent overheat prevention, temp-upper-limit error, overcurrent fuse; 2A service outlet (AC100–115 V)Internal Φ240 × H119 mm; external Φ262 × H240 mm; ~4.5 kg; safety: automatic + independent overheat prevention, temp-upper-limit error, overcurrent fuse; 2A service outlet (AC100–115 V)
Heating bathWater bath BM-302-A, 5 L, RT +10 to +90 °C (±1.0 °C)Water bath BM-302-A, 5 L, RT +10 to +90 °C (±1.0 °C)
Rotary motorDC brushless (simple servo)DC brushless (simple servo)
ConfigurationSet A · Water bath BM-302-A · 115 VSet B · Water bath BM-302-A · 115 V
Rotation modeForward / reverse / auto inversionForward / reverse / auto inversion
Safety deviceDC motor: overload, overvoltage, low-voltage, rotation-speed-sensor error; AC adapter: internal short-circuit, overcurrent, overvoltage protectionDC motor: overload, overvoltage, low-voltage, rotation-speed-sensor error; AC adapter: internal short-circuit, overcurrent, overvoltage protection
Rotation speed5–315 rpm (encoder dial: ±1 slow / ±10 fast)5–315 rpm (encoder dial: ±1 slow / ±10 fast)
Receiving flask100–2000 mL100–2000 mL
Cooling condenserDouble corrugated tube, 0.143 m² cooling surfaceDouble corrugated tube, 0.143 m² cooling surface
Evaporation flask50–2000 mL (optional reducer for smaller flasks)50–2000 mL (optional reducer for smaller flasks)
Condenser retentionNoneCondenser bracket (included)
Evaporation capacityUp to 23 mL/minUp to 23 mL/min
Included accessoriesMain unit: AC adapter (1), power cable (1), bath guide (1), rear cover (1), single-sided tape fastener roll (1), double-sided tape fastener roll (1). Glass set: cooling condenser (type A/B/C) (1), rotary joint (1), evaporation flask (1), receiving flask (1), ball joint clamp (1), flask clip (1), vacuum seal (1), condenser insulation kit (1); Set B/C add condenser bracket (1) + hex wrench (1)Main unit: AC adapter (1), power cable (1), bath guide (1), rear cover (1), single-sided tape fastener roll (1), double-sided tape fastener roll (1). Glass set: cooling condenser (type A/B/C) (1), rotary joint (1), evaporation flask (1), receiving flask (1), ball joint clamp (1), flask clip (1), vacuum seal (1), condenser insulation kit (1); Set B/C add condenser bracket (1) + hex wrench (1)
Condenser connectionsSuction port GL-14 (lower), Φ10 nozzle; cooling port GL-14 (two, lower), two Φ10 nozzlesSuction port GL-14 (upper), Φ10 nozzle; cooling port GL-14 (two, lower), two Φ10 nozzles
Operating ambient temp.5–35 °C5–35 °C
Overall dimensions (W×D×H)744 × 365 × 534 mm (overall, incl. bath)554 × 365 × 745 mm (overall, incl. bath)

Highlighted rows differ. Specs are sourced from manufacturer documentation.

FAQ

What's the difference between the Yamato RE-202-AWA — Rotary Evaporator with Glass Set A & Water Bath (5 L), 115V and the Yamato RE-202-BWA — Rotary Evaporator with Glass Set B & Water Bath (5 L), 115V?
The main differences are in Power, Vacuum, Weight. The table above shows every spec side by side; the decision guide highlights which fits which use case.
Which should I buy?
It depends on your application and budget — compare the highlighted specs above. Our team can help you choose; request a quote and we'll advise.
Do both carry a warranty?
Yes — both are sold through Legacy Lab Supplies as an authorized distributor and carry full manufacturer warranty.

Email me this comparison

Get this side-by-side plus our buying guide for this category. No spam.

Still deciding? Our team compares options with you — no pressure.

My Cart

🛒

Your Cart is empty

Browse Products