The Yamato DR-201-115V is a programmable high-temperature natural-convection oven with a 300–700 °C operating range, bridging the gap between a laboratory drying oven and a small electric furnace. With a compact 13.75 L chamber and accurate high-temperature control, the Yamato DR-201-115V can serve as an ashing/sintering furnace as well as a high-temperature drying oven or incubator. It is a capital instrument and the entry into Yamato's furnace-class oven range.
Key Specifications
| Spec | Value |
| Model (focus) | Yamato DR-201-115V (brochure model DR201) |
| System | Natural convection |
| Temperature control range | 300–700 °C |
| Temperature control accuracy | ±5 °C (at 700 °C) |
| Temperature fluctuation | 10 °C (at 700 °C) |
| Temperature distribution accuracy | ±25 °C (at 700 °C) |
| Temperature gradient | 30 °C (at 700 °C) |
| Temperature rise time | ~70 min (room temp +5 °C to 700 °C) |
| Temperature fall time | ~150 min (700 °C to 300 °C) |
| Interior / exterior material | Stainless steel sheet / chromium-free electrogalvanized steel, baked finish |
| Insulation | Ceramic fiber rock wool |
| Heater | Iron-chrome wire heater, 1.3 kW |
| Controller | PID control by microcomputer |
| Display | Green 4-digit LED (reading), red 4-digit LED (setting) |
| Operation modes | Fixed temp, program, program auto-start, auto-start, quick auto-stop, auto-stop |
| Program capability | 6 patterns (PrG1: 30 steps; PrG2–3: 15; PrG4–6: 10); step weight, repeat, hold, skip |
| Sensor | K-thermocouple (W sensor) |
| Internal dimensions (W×D×H) | 250 × 250 × 220 mm |
| External dimensions (W×D×H) | 520 × 443 × 612 mm (protrusions excluded) |
| Chamber capacity | 13.75 L |
| Shelf load / steps / pitch | 15 kg/plate, 30 kg total / 3 steps / 33 mm |
| Power supply | AC115V, 11.5 A, 50/60 Hz (with plug) |
| Weight | ~36 kg |
| Included | 2 perforated stainless shelf plates |
| Compatible accessories | Stand ONS60 (212802), shelf plate (212808), seismic mat set of 4 (296902), external alarm output terminal (281283), time-up output terminal (281284), temperature output terminal 4–20 mA (281285) |
Application Profile
The DR-201-115V is built for work above the reach of a standard drying oven — ashing and sintering, high-temperature material conditioning, and heat treatment where a controlled 300–700 °C soak is needed but a full muffle furnace is oversized. Because it is a natural-convection design, it heats without a circulation fan, which suits work where forced air would disturb light residues or ash. The dual-color LED display separates the live reading (green) from the setpoint (red) for clear high-temperature operation.
Why the Yamato DR-201-115V spans oven and furnace duty
At 700 °C, uniformity necessarily widens — the brochure states ±25 °C distribution and a 30 °C gradient at full temperature — which is normal for a compact high-temperature chamber and the reason ashing/sintering (tolerant of gradient) is a natural fit while tight-uniformity drying stays in the lower-temperature DX/DVS ovens. The six-pattern programmer (up to 30 steps) with step weight, repeat, hold, and skip supports multi-stage ramp/soak furnace profiles. (See oven-temperature-uniformity.)
Frequently Asked Questions
What temperature range does the Yamato DR-201-115V reach? It operates from 300 °C to 700 °C, with ±5 °C control accuracy at 700 °C.
Can it be used as a furnace for ashing or sintering? Yes. The brochure states it can serve as an electric furnace for ashing and sintering, as well as an incubator and drying oven within its range.
How uniform is the temperature at 700 °C? Distribution accuracy is ±25 °C and the temperature gradient is 30 °C at 700 °C — appropriate for furnace-type work rather than tight-tolerance uniform drying.
Is it programmable? Yes. It offers six program patterns (up to 30 steps in PrG1) with step weight, repeat, hold, and skip functions.
How large is the chamber and what shelving is included? The chamber is 13.75 L (250 × 250 × 220 mm) with three shelf positions at 33 mm pitch; two perforated stainless shelf plates are included, each rated 15 kg (30 kg total).
What accessories are available? An ONS60 stand, extra shelf plates, a four-piece seismic mat set, and output terminals for external alarm, time-up, and 4–20 mA temperature signal (some require factory installation).
Ordering & Configuration
quote-based. The DR-201-115V is a capital high-temperature oven sold through a quote. At quote we confirm the 115 V service and plug, your process temperature and program profile within 300–700 °C, shelf and stand needs, and any output-terminal options (external alarm, time-up, or 4–20 mA temperature — note some options are factory-installed and the external-alarm and time-up terminals cannot be installed together). Warranty terms are confirmed with the quote, and lead time is provided at quotation. Request a quote to configure the DR-201-115V for your ashing, sintering, or high-temperature process.
DR201 high-temperature oven, by voltage: DR-201-115V (this unit, AC115V 11.5 A) and DR-201-220V (AC220V 6.0 A) are the same 13.75 L, 300–700 °C oven on different mains. Choose the DR201 when you need furnace-class temperatures in an oven footprint; step to the 500 °C DH-650Z or the DF/DH fine ovens when larger forced-convection chambers at lower ceilings are the priority.
