Heating Element, 115 V — Replacement for BactiZapper Classic

The B1000-RA is the 115 V replacement heating element for the BactiZapper Classic (B1000) microsterilizer. Sold at $196, the replacement element is the end-of-life service component for BactiZapper Classic chassis where the original element has reached the end of its operational life (typical multi-year service life under normal use; element resistance gradually drifts as the ceramic ages). The replacement element is voltage-specific because element resistance must match line voltage to deliver the rated 815 °C operating temperature.

Voltage options: This accessory is also available for European voltage configurations of the parent equipment.

Key Specifications

Why Voltage-Specific — Resistance Matching

Heating-element resistance must be matched to line voltage to deliver the rated operating temperature. A 115 V element installed in a 230 V chassis would draw 4× the rated current (V²/R for fixed resistance under doubled voltage), causing catastrophic element failure within seconds. A 230 V element installed in a 115 V chassis would draw ¼ the rated current, producing insufficient heat to reach 815 °C operating temperature.

Confirm voltage match at every replacement-element procurement.

Heating Element Selection — Voltage and Chassis Family

Critical: the Classic-family element (B1000-RA) and the Tilt-family element (B1001-RA) DO NOT interchange — the Tilt chassis uses a different element-assembly form factor to accommodate the tilt mechanism.

When to Replace the Heating Element

The BactiZapper ceramic heating element has a multi-year service life under normal use, but warrants replacement when:

• Operating temperature drops below 815 °C — observable as incomplete loop sterilization (loops emerge dark-red instead of bright-red; sterilization cycle takes longer)
• Element discoloration / cracking — visual inspection during routine maintenance
• Audible / visual element failure — element makes noises or visibly arcs during operation
• Manufacturer-recommended replacement interval — confirm interval per Benchmark Scientific service guidance

Routine inventory recommendation: institutional facilities running BactiZapper Classics at high throughput benefit from maintaining one replacement element on-shelf per chassis to minimize downtime when element failure occurs.

Ordering & Configuration

Confirm voltage match. B1000-RA = 115 V (for B1000 US plug chassis); 230 V variant available by special order. Confirm regional chassis voltage at order.

Confirm chassis family. B1000-RA fits Classic (B1000) chassis only; the Tilt chassis (B1001) requires the B1001-RA element instead.

Pair with chassis service / installation. Heating-element replacement requires partial disassembly of the BactiZapper chassis. Confirm facility service capability or arrange installation through Benchmark Scientific service.

Confirm at quote: chassis voltage and family (Classic vs Tilt), end-of-element-life justification, installation service plan, and lead time.

Warranty: Per Benchmark Scientific standard accessory / replacement-component terms — confirm at quote.

Replacement heating element selection:

- B1000-RA (this product) — 115 V Classic chassis ($196)

- B1001-RA — 115 V Tilt chassis ($216, different form factor)

Pick the 115 V Classic element for B1000 chassis end-of-life replacement; verify voltage and chassis-family match before installation. 230 V variant available by special order.